Sony VPL-V W100 5 Adjust the vertical picture position, 1 Plug the AC power cord into a wall outlet, 4 Press INPUT to project the picture on the screen

Refer to the operating instructions of the connected equipment.

1 Plug the AC power cord into a wall outlet.

The ON/STANDBY indicator lights in red and the projector goes into standby mode.

ON/
STANDBY	Lights in red.

2 Press the ?/1 (on/standby) switch to turn on the projector.

The ON/STANDBY indicator flashes in green, and then lights in green.

ON/	Flashes in green for a few
STANDBY
	seconds, and then lights in
	green.

3 Turn on the equipment connected to the projector.

4 Press INPUT to project the picture on the screen.

Each time you press the button, the input indication and equipment to be projected change. (1 page 30)

INPUT Video

Tip

When “Auto Input Search” is set to “On” in the Function menu, the channel of the signal input is automatically displayed by pressing INPUT. (1 page 50)

5 Adjust the vertical picture position.

Press the LENS button repeatedly until the Lens Shift adjustment window (test pattern) appears. Then select the proper vertical position by pressing the M/m/</, buttons.

To move the position upward, press M or ,. To move the position downward, press m or <.

Preparations and Connections

Step 3: Adjusting the Picture Size and Position 23 GB