Symptom

Cause and Remedy

 

 

 

 

 

 

LAMP/COVER flashes.

c Close the top cover and the lamp cover securely, or attach the

 

 

 

filter holder securely. (1 pages 63 and 67)

 

 

 

 

 

 

LAMP/COVER lights up.

c The lamp has reached the end of its useful lifespan. Replace the

 

 

 

lamp. (1 page 63)

 

 

 

c The lamp has reached a high temperature. Wait until the lamp

 

 

 

cools, and then turn on the power again. (1 page 32)

 

 

 

 

 

 

TEMP/FAN flashes.

c The fan is broken. Consult with qualified Sony personnel.

 

 

 

 

 

 

TEMP/FAN lights up.

c The internal temperature is unusually high. Check to ensure that

 

 

 

if nothing is blocking the ventilation holes or whether or not the

 

 

 

projector is being used at high altitudes.

 

 

 

 

 

 

LAMP/COVER and

c Disconnect the AC power cord, re-connect it, then turn on the

 

 

 

TEMP/FAN light up.

power again. If the indicators still light up, the electrical system

 

Others

 

has a problem. Consult with qualified Sony personnel.

 

 

 

 

 

 

 

 

Message ListsWarning messages

Message

Cause and Remedy

 

High temp.! Lamp off in 1

c Turn off the power.

 

min.

c Check to ensure that nothing is blocking the ventilation holes.

 

(1 page 14)

 

 

 

Frequency is out of range!

c Frequency is out of range. Input a signal that is within the

 

acceptable frequency range of the projector.

 

 

 

Please check Input-A

c Set “Input-A Signal Sel.” in the Setup

menu to

Signal Sel.

“Computer” when an RGB signal is input from a computer. (1

 

page 53)

 

 

 

 

Please check DVI Signal

c Set “DVI Signal Sel.” in the Setup

menu to “Computer”

Sel.

when an RGB signal is input from a computer. (1 page 53)

 

Note

 

 

Be sure to remove the DVI cable to disconnect the connection

 

between the projector and a digital tuner and so on, before setting

 

“DVI Signal Sel.”

 

Please replace the Lamp/ c The lifespan of the lamp and the air filter is running out. (50

Filter.hours is an approximate figure.) Lamp/Filter life remains

less than 50H.

Please replace the Lamp/ c The lifespan of the lamp and the air filter is running out. (15

Filter.hours is an approximate figure.) Lamp/Filter life remains

less than 15H.

Troubleshooting 61 GB