The preset memory number 44 is available when DDC is set to off on the computer. However, the screen resolution of the projector may not be supported, or it is possible that DDC cannot be turned off, depending on the computer. For details, refer to the operating instructions supplied with your computer.

DDC (Display Data Channel) allows the computer to obtain information about features from the monitor. It also allows output of the most appropriate refresh value automatically, based on the resolution of the monitor.

Note

When a signal other than the preset signals shown above is input, the picture may not appear properly.

Preset memory numbers for each input signalAnalog signal

Signal

Preset memory number

 

 

Video signal (VIDEO INPUT and

1, 2

S VIDEO INPUT connectors)

 

 

 

Component signal (INPUT A and Y/CB/PB/CR/

3 to 11

PR connectors)

 

 

 

Video GBR signal (INPUT A connector)

3 to 11

 

 

Computer signal (INPUT A connector)

21 to 39, 56

 

 

Digital signal

 

Signal

Preset memory number

 

 

Component signal (HDMI connector)

3 to 8, 10 to 13

 

 

Video GBR signal (DVI-D and HDMI

3 to 8, 10 to 13

connectors)

 

 

 

Computer signal (DVI-D connector)

21 to 42, 44, 45, 47, 50, 55 to 57

 

 

Computer signal (HDMI connector)

26

 

 

Others

Specifications 73 GB