Sony VPL-V W100 Network Setting

High Altitude Mode	Use this item when using the projector at high altitudes.
	Off: Use this setting when using the projector at normal altitudes.
	On: Use this setting when using the projector at an altitude of 1,500
	m or higher.
	Note
	When this item is set to “On,” the number of turns of the fan
	increases.

Network Setting

You can set internet protocols such as IP address, Subnet Mask, Default Gateway, and DNS Server when accessing the projector from a computer or using “ImageDirector2” application supplied.

After completing all of settings, select “Apply” using m button, then press

ENTER.

IP Address Setup	Selects either “Auto (DHCP)” or “Manual.”
	When you select “Manual,” set the following “IP Address,”
	“Subnet Mask,” and “Default Gateway.”
IP Address	Sets the IP Address of the projector.
	(1.0.0.0 to 223.255.255.255)
Subnet Mask	Sets the Subnet Mask of the projector.
	(1.0.0.0 to 255.255.255.255)
Default Gateway	Sets the Default Gateway of the projector.
	(1.0.0.0 to 223.255.255.255)
Primary DNS	Sets the DNS server to be used as a priority.
	(1.0.0.0 to 223.255.255.255)
Secondry DNS	Sets the alternative DNS server.
	(1.0.0.0 to 223.255.255.255)
MAC Address	Displays MAC address of the projector. You cannot change.

Note

To use the Network setting function, set “Standby Mode” to “Standard” in the

Function menu. (1 page 50)

GB 52 Installation Menu