Sony VPL-V W100 Connecting to a Computer

Connecting to a Computer

Right side of the projector

Computer

to monitor output

HD D-sub 15-pin cable (not supplied),

or DVI - DVI cable (not supplied)

: Video signal flow

Preparations and Connections

Tip

Set “Input-A Signal Sel.” or “DVI Signal Sel.” in the Setup menu to “Auto” or “Computer.” If the input signal does not appear properly, set it to “Computer.” (1 page 53)

Note

If you set your computer, such as a notebook type, to output the signal to both your computer’s display and an external monitor, the picture of the external monitor may not appear properly. Set your computer to output the signal to only the external monitor. For details, refer to the computer’s operating instructions supplied with your computer.

Step 2: Connecting the Projector 21 GB