Information Menu

The Information menu displays the model name, serial number, the horizontal and vertical frequencies of the input signal and the cumulated hours of usage of the lamp.

Model name

Serial No.

Memory No.

Signal type

Model name

Displays the model name (VPL-VW100) and the serial number.

 

 

fH

Displays the horizontal frequency of the input signal.

 

 

fV

Displays the vertical frequency of the input signal.

 

 

Memory No.

Displays the preset memory number of the input signal.

 

 

Signal type

Displays the type of the input signal.

 

 

Lamp Timer

Indicates how long the lamp has been turned on (total usage).

 

 

Note

You cannot change the displays listed above.

Menus the Using

About the Preset Memory No.

This projector has 42 types of preset data for input signals (the preset memory). When the preset signal is input, the projector automatically detects the signal type and recalls the data for the signal from the preset memory to adjust it to an optimum picture. The memory number and signal type of that signal are

displayed in the Information menu.

You can also adjust the preset data through the Signal menu. This projector also has 20 types of user memories for Input-A and DVI channels mainly for the computer signal into which you can save the setting of the adjusted data for an unpreset input signal, respectively.

When an unpreset signal is input for the first time, a memory number is

displayed as 0. When you adjust the data of the signal in the Signal menu, it will be registered to the projector. If more than 20 user memories are registered, the newest memory always overwrites the oldest one.

See the chart on page 71 to find if the signal is registered to the preset memory.

Note

When the aspect ratio of input signal does not match the screen size, a part of the screen is displayed in black.

Information Menu 55 GB