8 Insert the new lamp unit straight in all the way until it is securely in place and you hear it click.

Notes

•Insert the new lamp unit while holding it tightly, because it is heavy (approx.

2.9 kg (6 lb 6 oz)). Dropping the lamp may result in an injury.

•Be careful not to touch the fan or optical block inside the unit.

•Confirm that the lamp release lever has returned to its original position. If not, the projector will not turn on.

9 Tighten the four screws loosened in step 6 to secure the lamp unit to the projector.

10Tighten the screw loosened in step 4 to close the lamp cover.

11Close the top cover.

Others

12Connect the power cord and set the projector to standby mode.

Confirm that the ON/STANDBY indicator is lit in red.

13Pointing the remote control at the projector, press the following buttons on the remote control in the following order for less than five seconds each: RESET, <, ,, ENTER.

Caution

Do not put your hands into the lamp replacement slot, and do not allow any liquid or other objects into the slot to avoid electrical shock or fire.

Notes

•Be sure to use an LMP-H400 Projector Lamp for replacement. If you use lamps other than the LMP-H400, the projector may malfunction.

•Be sure to turn off the projector and unplug the power cord before replacing the lamp.

Replacing the Lamp 65 GB