Sony VPL-V W100 Example:, 3 Turn on the equipment connected to the projector, 2 Press the ?/1 (on/standby) switch to turn on the projector

2 Press the ?/1 (on/standby) switch to turn on the projector.

The ON/STANDBY indicator flashes in green, and then lights in green.

ON/	Flashes in green for a few
STANDBY
	seconds, and then lights in
	green.

3 Turn on the equipment connected to the projector.

Refer to the operating instructions of the connected equipment.

4 Press INPUT repeatedly to select the input you want to project on the screen.

Display the indication of the input you want.

Example: To view the picture from the video equipment connected to the VIDEO INPUT connector.

INPUT

Video

To view the picture from	Press INPUT to
	display
Video equipment connected to the VIDEO INPUT	Video
connector
Video equipment connected to S VIDEO INPUT connector	S-Video
Component equipment connected to Y/CB/PB/CR/PR on the	Component
projector
RGB/component equipment connected to the INPUT A	Input-A*
connector
Video equipment connected to the DVI-D connector	DVI*
Equipment connected to the HDMI connector	HDMI

*Set the “Input-A Signal Sel.” setting and “DVI Signal Sel.” setting in the Setup menu according to the signal input. When you set it to “Auto,” and cannot

display the picture properly, select an appropriate signal according to the input signal. (1 page 53)

Tip

When “Auto Input Search” is set to “On” in the Function menu, the channel of the input signal is automatically displayed when you press INPUT.

GB 30 Projecting the Picture on the Screen