Calling

Before voice dialing

You must first activate the voice dialing function and record your voice commands. An icon appears next to a phone number that has a voice command.

To activate voice dialing and record names

1} Settings } the General tab } Voice Control } Voice Dialing } Activate } Yes and select a contact.

2If the contact has more than one number, use

and to view the numbers. Select the phone number to which you want to add the voice command. Now you are going to record a voice command such as “John mobile” for the phone number you selected.

3Instructions appear. Lift the phone to your ear, wait for the tone and say the command that you want to record. The voice command is played back to you.

4If the recording sounds ok } Yes. If not } No and repeat step 3.

5To record another voice command for a contact

Edit Names } New Voice Cmd. again and repeat steps 2-5 above.

Caller name

You can choose whether you want to hear the recorded contact name when you receive a call from that contact.

To turn the caller name On or Off

}Settings } the General tab } Voice Control

}Play Caller Name.

Voice dialing

You can voice dial by saying a pre-recorded voice command. Start voice dialing from standby using the phone, a portable handsfree, or by saying your magic word.

To make a call from the phone

1From standby, press and hold one of the volume buttons.

2Lift the phone to your ear, wait for the tone and say the name you recorded earlier, for example “John mobile”. The name is played back to you and the call is connected.

To make a call with a handsfree

From standby, press the handsfree button.

30This is the Internet version of the user's guide. © Print only for private use.

Page 31
Image 31
Sony Ericsson Z502a manual Voice dialing, To activate voice dialing and record names, To turn the caller name On or Off