Calling

To reject a call using voice commands

When the phone rings, say “Busy”.

The call is rejected. The caller is forwarded

to voicemail, if activated, or hears a busy tone.

Editing your voice commands

You can keep all your voice commands up to date by re-recording them or deleting the ones you do not use. You can also edit a voice command for a phone number in the phonebook. Select the contact you want to edit a voice command for } More

}View & edit. Scroll to the relevant tab and edit your voice command.

To re-record a voice command

1} Settings } the General tab } Voice Control } Voice Dialing } Edit Names.

2Select a voice command } More } Replace Voice.

3Lift the phone to your ear, wait for the tone and say the command.

Tips when recording and using voice commands

If your phone cannot detect speech, one of the following might have happened:

You spoke too softly – try speaking louder.

You held the phone too far away – hold it as you do during a call.

The voice command was too short – it should be around one second long and more than one syllable.

You spoke too late or too soon – speak immediately after the tone.

You did not record the voice command when the handsfree was attached – for voice control with a handsfree kit, record when the handsfree is attached.

You used another intonation – use the same intonation as you did when recording the voice command.

32This is the Internet version of the user's guide. © Print only for private use.

Page 33
Image 33
Sony Ericsson Z502a manual To reject a call using voice commands, Editing your voice commands, To re-record a voice command