Star Micronics LC-8021 manual Selecting a bank, Using the EDS Mode

20Using the EDS Mode

Note:

The contents of the above message are the same, regardless of whether you enter EDS-1 or EDS-2. The asterisks indicate the current EDS Mode switch settings for all the banks in both sub-modes.

Selecting a bank

❏While in the EDS Mode (EDS-1 or EDS-2), use the control panel’s MULTI- PART button to select a bank. While the DATA indicator is lit, the lit indicator indicates the currently selected bank.

Lit Indicator	Selected Bank
MULTI-PART	A
MULTI-PART + EJECT	B
EJECT	C
EJECT + LF	D
LF	E
LF + ON LINE	F

Note:

EDS-2 has only three banks, so pressing the BANK button cycles through banks A, B, and C only. Indicators EJECT + LF, LF, and LF + ON LINE do not light with EDS-2.