Star Micronics LC-8021 manual Selecting a switch, Changing a switch setting, Exiting the EDS Mode

Selecting a switch 21

Selecting a switch

❏While in the EDS Mode (EDS-1 or EDS-2), use the control panel’s EJECT button to select a bank switch. While the DATA indicator is off, the lit indicator indicates the currently selected switch.

Lit Indicator	Selected Switch
MULTI-PART	1
MULTI-PART + EJECT	2
EJECT	3
EJECT + LF	4
LF	5
LF + ON LINE	6

Changing a switch setting

❏After selecting a bank and switch, press the control panel’s LF button to turn the switch on and off. The current setting of the switch is shown by the POWER indicator: the indicator is lit when the switch is on, and is not lit when the switch is off.

Printing the current switch settings

❏In the EDS Mode, hold down the control panel’s ON LINE button, and then press the LF button to print the current EDS settings. Asterisks on the printout show whether a switch is turned on or off.

Exiting the EDS Mode

❏To save EDS settings you have made and exit the EDS Mode, press the ON

LINE.