Star Micronics LC-8021 manual EDS-2 Settings, BANK A Switch 1 Data Length, Switch 2 Parity Check

EDS-2 Settings 31

EDS-2 Settings

The following details all of the settings you can make for EDS-2. For communications protocol settings (Banks A and B), the matching settings you have to make in your MS-DOS AUTOEXEC.BAT file.

BANK A

Switch 1: Data Length

Specifies the number of bits that the computer transmits as one byte. This setting is normally 8.

Data Length	SW1	DOS Setting
8 bits	ON	8
7 bits	OFF	7

Switch 2: Parity Check

This switch specifies whether or not a parity check should be performed on the data.

Parity Check	SW2	DOS Setting
Disabled	ON	Disabled
Enabled	OFF	Enabled

Switch 3: Parity

This switch specifies the parity as non, odd, or even.

Parity	SW3	DOS Setting
Odd	ON	O
Even	OFF	E