Star Micronics LC-8021 manual Connecting to your computer

Document table

The paper will automatically be fed into the printer.

If your are using letterhead, make sure the paper is facing up, with the top towards the printer.

❏ Start the printing operation from your software application.

❏ After the printing is complete, press EJECT to eject the paper from the printer.

Connecting to your computer 11

❏Insert the paper into the printer as far as it will go, sliding its left side against the printer’s left guide.

Important!

If the paper is not inserted straight into the printer, it will be considered a loading error and the paper will be ejected. Be sure to insert the paper correctly.

Inserting the paper with its left side more than 7 mm to the right of the left guide will be considered an error and the paper will be ejected.

Paper

Document table extension

Control panel

Connecting to your computer

Your printer comes equipped with two interfaces built in as standard: one parallel interface and one serial interface.

This printer does not come with cables, so you must purchase one separately to match the needs of you computer.