Star Micronics NX-2400 Select Upright Characters, Double-strike Printing, Start Underlining

Select	upright	characters
1Mode 1	ASCII	1		Decimal	I	Hexadecimal	1
Std.	<ESC>	“ 5”	27	53	1B	35
IBM	<FS>	“5”	28	53	1c	35

Stops italic printing and causes subsequent characters to be printed up- right. Ignored if the printer was set to stay in panel style at power-on.

Emphasized printing

Mode	ASCII		Decimal	Hexadecimal
Both	<ESC>	“E”	27 69	1B 45
	Causes subsequent characters to be emphasized by adding extra thickness
	to vertical	strokes.

Cancel emphasized printing

Mode	ASCII			Decimal		Hexadecimal
Both	<ESC>	“F”	27	70	1B	46
	Cancels	emphasized	printing.
Double-strike		printing
Mode	ASCII			Decimal		Hexadecimal
Both	<ESC>	“G”	27	71	1B	47

Causes subsequent characters to be printed in double-strike mode with a slight vertical paper motion in between, causing a thickening of hori-

zontal strokes. For bold print, use of double-strike is recommended in

LQ mode, and combined use of emphasized and double-strike is recom-

mended in draft mode. Double-strike cannot be used with superscripts or subscripts.

Cancel double-strike printing

Mode	ASCII					Decimal			Hexadecimal
Both	<ESC>		“H”		27	72		1B	48
	Cancels		double-strike		printing.
Start	underlining
Mode	ASCII					Decimal			Hexadecimal
Both	< ESC	>	‘I_”	‘$1”	27	45	49	1B	2D	31
	< ESC	>	“-”	Cl>	27	45	1	1B	2D	01

Causes subsequent characters to be underlined. IBM block graphics characters and spaces skipped by horizontal tabulation are not underlined.

59