Star Micronics NX-2400 user manual Define line spacing to n/72 inch, Execute ESC a, Line feed

Define line spacing to n/72 inch

Mode	ASCII			Decimal	Hexadecimal
IBM	<ESC>	“A”	n	21 65 n	1B 41 n

Defines the distance the paper advances or reverses in subsequent lines feeds to n/72 inch, where n is between 1 and 85. If n = 0, this command is ignored. The new line spacing does not take effect until the next < ESC > “2” command.

Execute < ESC > “A”

Mode	ASCII		Decimal	Hexadecimal
IBM	<ESC>	“2”	21 50	1B 32

Sets the line spacing to the value defined by the last preceding < ESC > “A” command. Sets the line spacing to l/6 inch if there is no preceding < ESC > “A” command.

Line feed

Mode	ASCII	Decimal	Hexadecimal
Both	<LF>	10	OA

Prints the current line and feeds the paper to the next line. If DIP switch l-2 is ON, also moves the next print position to the left margin. See the preceding commands for the line spacing.

Reverse line feed

Mode	ASCII		Decimal	Hexadecimal
Both	<ESC’	<LF>	21 10	1B OA

Prints the current line and feeds the paper in the reverse direction to the preceding line. If DIP switch 1-2 is ON, also moves the next print position to the left margin. See the preceding commands for the line spacing. Ignored when friction feed is used.

Select forward feed mode

Mode	ASCII		Decimal	Hexadecimal
Std.	<FS>	“F”	28 70	1C 46

Cancels the reverse feed mode and selects forward feed mode. This is the default setting at power-up.

Select reverse feed mode

Mode	ASCII		Decimal		Hexadecimal
Std. 1	<FS>	“R”	1 28 82	IlC	52

Selects reverse feed mode. Reverses the direction of all vertical move- ments. Ignored when friction feed is used.