Star Micronics NX-2400 Delete Last character Sent, Rom, Other Printer Control Commands, Msb

L.

L

i.

L.

L.

Select	ROM	character	set
Mode	ASCII			Decimal			Hexadecimal
Both	<ESC>	“O/Jo” “0”	27	37	48	1B	25	30
	<ESC>	“O/O” < 0 >	27	37	0	IB	25	00

Stops using the download character set and returns to the built-in ROM character set. Ignored when DIP switch 2-l is ON.

OTHER PRINTER CONTROL COMMANDS

Set MSB to 7

Mode	ASCII		Decimal	Hexadecimal
Both	<ESC>	“ > 13	27 62	IB 3E

Sets the most significant bit of each subsequent byte received to 1, allowing users with a 7-bit interface to access characters with ASCII codes greater than 127.

Set MS6 to 0

Mode		ASCII			Decimal		Hexadecimal
Std.		<ESC>	“=”	27	61	IB	3D
IBM		<FS>	“Y”	28	61	IC	3D
		Sets the most significant bit of each subsequent byte received to 0.
Accept		MSB	as is
Mode 1		ASCII			Decimal		Hexadecimal
Both	1	<ESC>	“#”	1 27	35	IIB	23
		Cancels the preceding commands and accepts the most significant bit as
		it is sent to the printer.
Delete		last character		sent
Mode		ASCII			Decimal		Hexadecimal
Std.	1	<DEL>		1127		(7F

Deletes the last character received. Ignored if the last character received has already been printed, or if the last character received was all or part of a command.

83