Star Micronics NX-2400 Select Character Width, Select character height, width, and line spacing

Select	character		width
Mode	ASCII			Decimal	Hexadecimal
Std.	<FS>	“E”	n	28 69 n	IC 45 n

Selects a character width according to the value of n as shown below.

n Character width

0Normal-wide

1 Double-wide

2Triple-wide

Select character height, width, and line spacing

Mode	ASCII				Decimal			Hexadecimal
	<ESC>	“[”	“c3”	<4>	21 91	64	4	IB	5B	40	04
Both	<o>	-co>	<o>	n	0	0	0 n	00	00	00	n
		M			m				m

Selects a combination of character height, width, and line spacing ac- cording to the value of n and m, as below. Does not move the base line.

n	Line spacing	Character height
0	Unchanged	Unchanged
1	Unchanged	Single	height
2	Unchanged	Double	height
16	Single	Unchanged
17	Single	Single	height
18	Single	Double	height
32	Double	Unchanged
33	Double	Single	height
34	Double	Double	height
m		Character width

1Single width (same as < ESC > “W” 0)

2 Double width (same as < ESC > “W” 1)

Double-height printing temporarily cancels the super/subscript and condensed printing modes, but these modes resume when the printer returns to normal height.