Star Micronics NX-2400 Set page length to n inches, Set top margin, Set bottom margin, Form feed

Set page length to n inches

IModel	ASCII			I	Decimal		I	Hexadecimal	I
Both	<ESC>	“C” CO>	n	27	61 0	n	1B	43 00	n

Sets the page length to n inches, where n is between 1 and 22 in Standard mode or between 1 and 127 in IBM mode. The current line becomes the top of the page.

Set top margin

1Model	ASCII			I	Decimal	I	Hexadecimal		I
Both	< ESC >	“c”	n	27	99 n	1B	63	n

Sets the top margin to n lines, where n is between 1 and 255. Printing begins on the (n + 1)th line on the page.

Set bottom margin

Mode 1	ASCII			Decimal	Hexadecimal
Both 1	<ESC>	“IV	n	I27 78 n	IlB 4E n	I

Sets the bottom margin ton lines, where n is between 1 and 127 in Standard mode or between 1 and 255 in IBM mode. The bottom margin is reset when you change the page length.

Cancel top and bottom margins

Mode	ASCII		Decimal	Hexadecimal
Both	<ESC>	“0”	I21 79	11B 4F
	Cancels both the top margin and the bottom margin.

Form feed

Mode	ASCII	Decimal	Hexadecimal
Both 1			I
	<FF>	1 12	lot

Feeds the paper to the top of the next page according to the current page length, and moves the print position to the left margin. When the auto- matic sheet feeder (ASF) is selected (DIP switch l-4 is OFF), this com- mand ejects the current page.

Return to top of current page

Mode	ASCII		Decimal	Hexadecimal
Both 1	<ESC>	<FF>	(27 12	IlB OC	1
	Feeds the paper backward to the top of the current page. Ignored when
	friction	feed is used.

72