By moving the cursor and pressing the Fl, F2, and F3 keys you can quickly build up the dot pattern. If necessary you can clear all dots by pressing F4 and start over. When the character is complete, press Return to store the dot data in the computer’s memory. The program will clear the character box and ask you to select the next character to design.
When you have finished designing characters, press the F6 key. The
program will ask you whether you want to save, download, and print the characters you have designed. If you answer Yes to all three questions, your
characters will be saved on a disk file and downloaded to the printer, and
the entire character set from character 33 (!) to character 126(
At any point while you are selecting or designing characters you can press F5 to skip the current character and proceed to the next character.
The program does not allow you to redefine the space character, or to
define any other character as an
Super/subscript character
I 27 8 910II121314/51617181920212223
ASCII Code: 60
Left space: 7
Character width: 23
Right space: 6
igure
