Star Micronics NX-2400 user manual Select Standard character, Select IBM character set

CHARACTER		SET COMMANDS
Select	standard character			set
thnodel	ASCII			I	Decimal		I	Hexadecimal		I
Both -	< ESC >	“t”	“0”	27	116	48	1B	74	30
	< ESC >	“t”	co>	27	116	0	1B	74	00
Std. .	< FS >	“1”	co>	28	73	48	1c	49	30
	< FS >	“1”	co>	28	73	0	1c	49	00

Selects the standard character set. This is the power-up default in Standard mode if DIP switch l-7 is ON.

Select IBM character set

Mode	ASCII				Decimal			Hexadecimal
Both	<ESC>	“t”	“1”	27	116	49	1B	74	31
	< ESC >	“t”	Cl>	27	116	1	1B	74	01
Std.	< FS >	“I”	Cl>	28	73	49	1c	49	31
	< FS >	“I”	Cl>	28	73	1	1c	49	01

Selects an IBM character set. This is the power-up default in IBM mode if DIP switch l-7 is OFF.

Select character set #7

IModel	ASCII				1	Decimal		1	Hexadecimal		I
					1			I
Both 1	< ESC	>	“7”		127	5.5		IlB	37
	Selects character set #l .
Select	character set #2
1Mode I	ASCII				I	Decimal		I	Hexadecimal		I
Both	< ESC	>	“6”		27	54		1B	36
	Selects		character	set #2.
Select	international			character	set
Mode	ASCII					Decimal			Hexadecimal
Std.	<ESC>		“R”	n	27	82	n	1B	52	n
IBM	<FS>		“R”	n	28	82	n	1c	52	n

Selects an international character set according to the value of n as shown next.

61