Star Micronics NX-2415 Expanded printing for one line , Cancel one-line expanded printing , Select character width , Select proportional spacing

. .
Expanded printing for one line
Mode ASCII Decimal Hexadecimal
Both <so> 14 OE
<ESC> <SO> 27 14 1B OE
Causes subsequent characters in the current line to be expanded to
double width. Characters return to normal width after the next line
feed (<LF>). The <DC4>, <VT>, <FF>, and <ES0 “W” 0 com-
mands also cancel expanded printing.
Cancel one-line expanded printing
IMode 1 ASCII 1 Decimal 1 Hexadecimal 1
I I I
Both 1 <JX4> I20 I 14
Stops one-line expanded printing set with <SO> or <ES0 <SO>.
Does not cancel <ESC> “W” 1.
Select character width
Mode ASCII Decimal Hexadecimal
Std. <FS> “E” n 28 69 n 1C 45 n
Selects a character width according to the value of n as shown
below.
n Character width
0 Normal-wide
1 Double-wide
2 Triple-wide
Select proportional spacing
IMode) ASCII I Decimal 1 Hexadecimal I
Both <ESC> “p*’ “1” 27 112 49 1B 70 31
<ESC> “p” <l> 27 112 1 1B 70 01
IBM <ESC> “F”’ cl> 27 80 1 1B 50 01
Causes subsequent characters to be proportionally spaced. Ignored
if the (PIbutton was pressed during power-up.
48