Star Micronics NX-2415 Perform one n/l 80-inch or n/216-inchline feed, Feed paper n lines

Perform one n/l 80-inch or n/216-inchline feed

Mode	ASCII		Decimal	Hexadecimal
Both	<ES6	“I-’ n	27 74 n	1B 4A n

Feeds the paper once by n/l 80 inches (standard mode) or n/216 inches, where n is between 1 and 255. Does not move the print position right or left when DIP switch l-2 is OFF. Does not change the line-spacing setting.

Perform one n/216=inch reverse line feed

Mode	ASCII		Decimal	Hexadecimal	-	.-~
Std.	cESC>	“j” n	27 106 n	1B 6A n

Feeds the paper once by n/2 16 inches in the reverse direction, where n is between 1 and 255. Does not move the print position right or left when DIP switch l-2 is OFF. Does not change the line-spacing setting.

Feed paper n lines

Mode	ASCII				Decimal			Hexadecimal
Both	<ESC>	“f’	“1”	n	27 102	49	n	1B	66	31	n
	<ESC>	“f’	<l>	n	27 102	1	n	1B	66	01	n

Feeds the paper n lines from the current line, where n is between 0
and 127.	-

Set top of page at current position					-
Mode	ASCII		Decimal	Hexadecimal	-
IBM	cESC>	“4”	27 52	1B 34	-

Sets the current position as the top-of-page position. Note that this can also be done from the control panel.

-

56