Star Micronics LC-240C, NX-2460 Using the Paper window, Length, Line Spacing, Auto LF with CR

24User Setup Utility

Using the Paper window

While in the User Setup Utility, select Paper from the menu bar.

Exit Load Save General

Font Paper Adjust. Port Help

Emulation	(•) Standard		*	RAM
	( ) IBM			usage
Graphic				Sleep
	(•)	Uni-direction	*
Direction	( ) Bi-direction
A.E.C.				Demo
	(•) Enabled		*
	( )	Disabled		Print
Ink				Default
	(•)	Color	*
color	( ) Monochrome			color

(•)	Input Buffer	*
( ) Download
(•)	15 min.	*
( )	30 min.
(•)	Self-print short	*
( )	Self-print long
(•)	Black	*
( ) Red

Current Data: Current General Setting

TAB	= Next Box
SPACE	= Set Function

=Scroll up

=Scroll down

= Menu Select

The following describes the various settings that are available for each parameter on this screen.

Page Length

❏Specify the length of the paper you are using.

Line Spacing

❏Select the line spacing you want to use.

Auto LF with CR

❏Switch auto LF with CR on (Enabled) or off (Disabled).

When auto LF (line feed) with CR (Carriage return) is disabled, the computer must send both a line feed code and a carriage return code at the end of each line. Most applications do this automatically. When auto LF with CR is enabled, the printer automatically performs a line feed whenever it receives a carriage return from the computer.

Note the following check points when trying to figure out which setting to use here:

✓If you find that your output is double-spaced when it should not be, change this setting to Disabled.

✓If you find that lines are printing over each other, change this setting to

Enabled.