15
Chapter 2: User Setup Utility
In addition to the Windows 3.1 driver, the 3.5” floppy disk drive that comes with
this printer also contains a User Setup Utility that gives you total control over a
variety of printing features and functions. In this chapter you will learn about:
❏Installing the User Setup Utility
❏Starting up the User Setup Utility
❏Editing setup data
❏Saving and loading and setup data
❏Exiting the User Setup Utility and sending the settings to the printer
Important!
All the procedures in this chapter assume that you are using a mouse and that
you are familiar with common mouse operations like click and double-click. If
you need information on mouse operations, see your computer manual. If you
want to operate the User Setup Utility without using a mouse (using function
keys, arrow keys, and the tab key) refer to the key function explanations at the
bottom of each User Setup Utility screen.

Installing the User Setup Utility

❏Insert the disk that contains the User Setup Utility into one of your
computer’s disk drives. This explanation assumes you are using the A:
drive, but you could use any drive. Just remember to change the “A:” drive
name specifications in the following steps to the name of the drive you are
using.
Important!
Note that you cannot use a mouse to navigate inside the User Setup Utility
installation screens. Instead, you must use the arrow, Enter, backspace, and
Delete keys as noted on the installation screens and in the following
procedures.