Star Micronics LC-240, LC-240C, NX-2460, NX-2460C Checking the port settings in the User Setup Utility 71, NEC Commands, Other Commands (Continued)

Checking the port settings in the User Setup Utility 71
Set initial condition IBM ESC [K
Ignored STD ESC h n
Stop printing IBM ESC j
Select printing color Both ESC r n
Cancel double-high mode STD ESC w0
Select double-high mode STD ESC w1
Ignored STD ESC ~ n
NEC Commands
Description Mode ASCII Code
Set line spacing to n /360 ″ STD FS 3 n
Initialize printer STD FS @
Cancel expanded printing STD FS E0
Select expanded printing STD FS E1
Select expanded (triple-width) printing STD FS E2
Select forward feed STD FS F
Select standard character table STD FS I0
Select IBM character table STD FS I1
Move download characters in 00H-7FH area to 80H-FFH STD FS I2
Select reverse feed STD FS R
Cancel double-height mode STD FS V0
Select double-height mode STD FS V1
24-pin hex density bit image STD FS Z
Print characters from all character chart STD FS \
Print one character from all character chart STD FS ^
Other Commands (Continued)
Description Mode ASCII Code