Juniper Networks M160 Installation Safety Guidelines and Warnings, Chassis Lifting Guidelines

Safety and Regulatory Compliance Information

¡Atención! El equipo está diseñado para trabajar con sistemas de alimentación tipo TN, IT.

Varning! Enheten är konstruerad för användning tillsammans med elkraftssystem av TN-, IT-typ.

Installation Safety Guidelines and Warnings

Observe the following guidelines and warnings before and during router installation:

Chassis Lifting Guidelines on page 239

Installation Instructions Warning on page 239

Rack-Mounting Requirements and Warnings on page 240

Ramp Warning on page 244

Chassis Lifting Guidelines

The weight of a fully configured chassis is about 370.5 lb (168 kg). Observe the following guidelines for lifting and moving the router:

Before moving the router, read the guidelines in “Preparing for Router Installation” on page 59 to verify that the intended site meets the specified power, environmental, and clearance requirements.

Do not attempt to lift a fully configured router by yourself. Using a mechanical lift to maneuver the router into a rack is recommended. If a lift cannot be used, a minimum of three people must lift the router, and you must remove components from the chassis before lifting. For lifting and component removal instructions, see “Initial Installation” on page 57.

Before lifting or moving the router, disconnect all external cables.

As when lifting any heavy object, lift most of the weight with your legs rather than your back. Keep your knees bent and your back relatively straight and avoid twisting your body as you lift. Balance the load evenly and be sure that your footing is solid.

Installation Instructions Warning

WARNING: Read the installation instructions before you connect the router to a power source.

Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem met de voeding verbindt.

Safety Guidelines and Warnings 239