About This Guide

Objectives on page xix

Audience on page xix

Documentation Conventions on page xix

List of Technical Publications on page xxi

Documentation Feedback on page xxiii

Requesting Support on page xxiii

Objectives

This manual describes hardware installation and basic troubleshooting procedures for the Juniper Networks M160 Internet router. It explains how to prepare your site for router installation, unpack and install the hardware, power on the router, perform initial software configuration, and perform routine maintenance. After completing the installation and basic configuration procedures covered in this manual, refer to the JUNOS Internet software configuration guides for information about further JUNOS software configuration.

NOTE: For additional information about Juniper Networks Internet routers and the Physical Interface Cards (PICs) they support—either corrections to or information that might have been omitted from this guide—see the hardware release notes at http://www.juniper.net/.

Audience

This guide is designed for network administrators who are installing and maintaining a Juniper Networks router or preparing a site for router installation. To use this guide, you need a broad understanding of networks in general, the Internet in particular, networking principles, and network configuration. Any detailed discussion of these concepts is beyond the scope of this guide.

Documentation Conventions

Table 1 defines the notice icons used in this guide.

Documentation Conventions

 

xix

 

Page 19
Image 19
Juniper Networks M160 manual About This Guide, Objectives, Audience, Documentation Conventions