M160 Internet Router Hardware Guide
Figure 83: Re moving the PC Card
1926
Eject button
PCG 0
SFM 0
SFM 1
MCS 0
RE 0
Insert the PC Card
To insert the PC card, fo llow this procedure (see F igure 84):
1. Orient the PC card with the Juniper Networkslogo facing in the direction
specified on the Routing Engine faceplate. Insert the card into the slot.
2. Press the cardfirmly all the way into the slot. Note that the PC card slot might
be located in a different position from that shown in Figure 84.
3. Reinstallt herear component cover and tighten the thumbscrew ateach corner
to secure it tothe chassis. For complete instructions, see “Reinstallingthe Rear
Component Cover” on page 109.
CAUTION: To maintain proper airflow and provide electromagnetic shield ing, do
not operate the routerwithout the rear component cover in place.
164 Replacing Host Module Components