Juniper Networks M160 manual 167

Replacing Hardware Components

NOTE: Wait until a message appears on the console confirming that the operating system has halted.

For more information about the command, see the JUNOS Protocols, Class of

Service, and System Basics Command Reference.

7.Using your thumbs, push and hold the red tab on each extractor clip toward the outer edge of the unit. Push the ends of the extractor clips outward to unseat the Routing Engine from the chassis.

8.Grasp the extractor clips and slide the unit about halfway out of the chassis.

CAUTION: Slide the Routing Engine straight out of the chassis. Damage can result if it gets lodged because of uneven movement.

9.Place one hand under the Routing Engine to support it, slide it completely out of the chassis, and place it on the antistatic mat or in the electrostatic bag.

Figure 85: Removing a Routing Engine

SFM 0

SFM 1

MCS 0

RE 0

PCG 0

PCG 1

Extractor

clip

1950

Replacing Host Module Components 167