Juniper Networks M160 manual Connecting the Router to Management and Alarm Devices

M160 Internet Router Hardware Guide

CAUTION: Do not substitute a metric nut driver or wrench. A tool that does not fit the nuts exactly can damage them. If a 7/16-in. tool is not available, use pliers or an adjustable wrench.

Wire cutters

Pliers

Electrostatic discharge (ESD) grounding wrist strap

Connecting the Router to Management and Alarm Devices

After you have installed the router into the rack, attach one or more external devices to the ports on the CIP that connect to the Routing Engines for management and service operations (see Figure 56). For specifications for the cable accepted by the Routing Engine management ports, see Routing Engine Interface Cable and Wire Specifications on page 74.

112 Connecting the Router to Management and Alarm Devices