Juniper Networks M160 Connector Interface Panel CIP, States for FPC LEDs Label Color Description

M160 Internet Router Hardware Guide

Table 11: States for FPC LEDs

Label	Color	State	Description
OK	Green	On steadily	FPC is functioning normally.
		Blinking	FPC is starting up or going offline.
		Off	FPC is offline or not installed.
FAIL	Red	On steadily	FPC has failed.

Connector Interface Panel (CIP)

The Connector Interface Panel (CIP) is located at the left side of the FPC card cage, as shown in Figure 1. It houses Routing Engine management ports and alarm relay contacts, as shown in Figure 14 and described in the following sections:

Routing Engine Management Ports on page 33

BITS Input Ports on page 34

Alarm Relay Contacts on page 34

32 Connector Interface Panel (CIP)