MANAGER / MAINTENANCE MODE
After using your STAR TRAC E SERIES TOTAL BODY TRAINERS for a period of time, you may wish to change some of its settings.
MANAGER MODE
The Manager Mode allow you to query and modify the basic settings of your Total Body Trainer. To enter Manager Mode:
1.Press and hold the 
, 
and 
keys together.
2.A beep will sound and “MANAGER MODE” will display momentarily in the Message Window.
3.Release all keys. “SERIAL NO #####” will display in the Message Window.
NOTE: The system will automatically exit Manager Mode if no key is pressed for 30 seconds.
The following keys are used to modify settings in MANAGER MODE:
Upper and Lower Data Information Window SCROLL Keys: Display the next and previous parameters, respective- ly.
Increase and Decrease LEVEL Keys: Adjust the value of the displayed parameter up and down, respectively, in incre- ments of 1 unit . These keys do not save the new value - see OK Key below.
OK Key: Updates (saves) the values of all parameters in Flash memory, and exits Manager Mode.
NOTE: To exit Manager Mode without saving any values or settings, press the QUICK START key.
The items that you may display and change with the previous keys are:
| Lowest | Highest | Default |
|
Item | Value | Value | Value | Meaning |
|
|
|
|
|
Serial No | 0 | 65535 | 0 | Serial number (set by factory) |
Date | 01/00 | 12/99 | 01/05 | Manufacture date for the Total Body Trainer (set by factory) |
Display Vers 1 | 01.00 | 99.99 | N/A | Display panel software version (set by factory) |
Display Vers 2 | 01.00 | 99.99 | N/A | Display panel software version (set by factory) |
LCB Vers | 01.00 | 99.99 | N/A | Display panel software version (set by factory) |
Units | English | Metric | English | English = units of pounds, miles, feet, inches; |
|
|
|
| Metric = units of kilograms, kilometers, centimeters. |
Time | 5 | 99 | 99 | Maximum time in minutes allowed for program, excluding |
|
|
|
| down. |
Weight | 50 (Lb) | 350 (Lb) | 350 lbs | Default (to user), typical weight in lb (UNITS=English), or kg |
| 22 (KG) | 158 (KG) | 158 (KG) | (UNITS=Metric). |
Language | N/A | N/A | ENGL | Language is English (ENGL), Dutch (DUTC), French (FREN), German (GERM), |
|
|
|
| Portuguese (PORT), Spanish (SPAN), Swedish (SWED), Italian (ITAL) or |
|
|
|
| Katakana (KATA). |
|
|
|
|
|
MAINTENANCE MODE
Your Service Representative may need to check accumulated data about the past usage of your STAR TRAC E SERIES TOTAL BODY TRAINER, test its display controls, or investigate error messages. For these reasons, your Total Body Trainer is equipped with a Maintenance Mode. The Maintenance Mode includes all of the items available through Manager Mode, plus additional items for Service and Diagnostic use. To enter Maintenance Mode:
1.Press and hold the 
, 
and 
keys together.
2.A beep will sound and “MAINTENANCE MODE” will display momentarily in the Message Window.
3.Release all keys. “SERIAL NO #####” will display in the Message Window.
STAR TRAC E SERIES TOTAL BODY TRAINERS OWNER’S MANUAL | 25 |
