Step 5.
Using provided screwdriver, remove the M4 x
0.7screws that hold the display assembly to- gether, then separate the back of the display from the front.
Note: Retain the screws for later use.
Step 7.
Line up the four holes of the mounting bracket with holes of the neck, then insert four 6mm x 50mm socket head cap screws.
7
Step 6.
Slide the back of the display with the mounting bracket onto the upper neck of the Total Body Trainer.
Caution: Be careful not to pinch any cables between the two sections of the assembled neck
Step 8.
Using provided 5mm hex key, tighten down the screws to 240
