Step 25.
Connect the CSAFE power cable from the bot- tom cover to J10 connector on the display board.
3
2
4
1
Step 26.
Take the front display plastics with the new cen- ter console to the base unit. Hold the front dis- play plastics at the top with one hand while con- necting the cables and harnesses with the other.
Step 27.
Identify the four cables coming out of the neck and mounting bracket:
1.Heart rate cable
2.Main I/O cable
3.Coax cable
4.DC power cable
Note: The coax and DC power cables are part of the PVS and embedded kits and should be tucked down the neck for possible future use.
25
