iPod® CENTER CONSOLE INSTALLATION INSTRUCTIONS
1
3
5
24
Step 1.
Remove all contents from the packaging and verify that you have the following parts:
1.iPod® center console.
2.iPod® cradle.
3.Owner’s manual.
4.Cable kit.
5.Lower back cover.
Note: If the center console is being installed on a new unit, then perform this installation prior to mounting the display assembly onto the frame.
12
Step 2.
Verify the cable kit has the following two parts:
1.Center console power cable.
2.Headphone jack and mount.
Step 3.
Using a #2 Phillips screwdriver, remove the (8) screws on the back of the display plastic. Set the screws aside, you will need them for re- assembly.
Step 4.
Carefully open the display plastic, so as to not detach the inner cables from the display.
19 |
|
