Star Trac E-TBTe manual Tie Wrap

Tie Wrap

Step 29.

Take the 5” piece of tape from the PVS kit and wrap the connectors so that all of the metal sur- face is covered.

Step 31.

Plug-in the 12-pin main I/O cable coming from the unit base into the front display circuit board at J4 connector.

45

Step 30.

Using a 5” tie wrap from the PVS kit, bind the cables from the PVS neck to one side of the display mount. Take the tie and put it through the hole on one of the display mount tubes.

Step 32.

Next, plug-in the heart rate cable from the neck into the heart rate board connector on the dis- play.

620-7921 Rev A