Star Trac E-TBTe manual Rev a

Step 21.

Connect the center console keypad cable to J8 connector on the display board.

Step 23.

Now connect the iPod® cable from the bottom cover to J10 connector on the center console board.

43

Step 22.

Connect the seven-pin interface cable from the console to J14 connector on the display board.

Step 24.

Next replace the bottom cover. Use the screws saved from the earlier step to secure the display bottom. Tighten the screws so they are snug, then plug in the CSAFE power cable to the back of the display.

Note: Take special care to not pinch any of the ca- bles between the plastics.

620-7921 Rev A