Star Trac E-TBTe manual Rev a

3

2

4

1

Step 9.

Identify the four cables coming out of the neck and mounting bracket:

1.Heart rate cable

2.Main I/O cable

3.Coax cable

4.DC power cable

Note: If the unit is not equipped with Personal View- ing Screen, the coax and DC power cables should be tucked down the neck as they are part of the PVS Kit.

Step 11.

Next, plug-in the heart rate cable into the HR board connector.

Step 10.

Plug-in the 12-pin main I/O cable into the front display circuit board at J4 connector.

Step 12.

Plug back the HR ground cable into the quick disconnect tab on the display frame.

8 620-7921 Rev A