2 | Safety |
|
|
2-1 Work Rules
Install, operate, and maintain this equipment according to applicable work and safety codes for your location. This includes OSHA, CE, NEC, CSA, SPI, and many other local, national, and international regulations. Obey these specific work rules:
Read and follow the instructions in this manual before installing, operating, or maintaining any equipment. Additional copies are available from the manufacturer.
Only qualified persons should work on, or with, this equipment.
Work only with approved tools and devices.
Disconnect and lock out power while working on this equipment.
2-2 Tools and Equipment Needed
You’ll need the following:
•Hand tools
•Fork lift or overhead lift
•Wire, conduit, and fittings for wiring runs (if receptacle is not already in place)
•Mounting bolts with lock nuts and washers, or pop rivets
•Compressed air tubing and fittings
Powder Hopper Loaders | Page 11 |
