Manuals / Sterling / Kitchen Appliance / Food Processor

Sterling 0, 882, 238 manual Lock-Outs, Plugs, and Other Safety Devices, The Line Cord Plug

Models: 238 0 882

1 43

Download 43 pages 18.2 Kb

Page 19

2-8-5 Lock-Outs, Plugs, and Other Safety Devices

2-8-5 Lock-Outs, Plugs, and Other Safety Devices

The Powder Hopper Loading system utilizes several types of safety devices.

The Line Cord Plug

This line cord plug allows the operator or maintenance personnel to unplug the loading system from its power source and tag it out. This plug may be tagged with any number of approved electrical lockout tags. These tags are available at most electrical supply stores.

WARNING!

Disconnect both of these items to ensure optimum maintenance personnel safety when cleaning or servicing this equipment.

Powder Hopper Loaders

Page 19

Image 19

Sterling 0, 882, 238 manual Lock-Outs, Plugs, and Other Safety Devices, The Line Cord Plug

Contents

Part Number Bulletin Number CV1-605.2 Effective 4/15/08 Powder Hopper Loadersfuture reference Write down your PowderHopper Loaders serial numbers here forWear SAFETY GLASSES and WORK GLOVES Safety ConsiderationsAnnex B Information Shipping Information Table of ContentsInstallation & Setup General InformationLoader Options MaintenanceTroubleshooting Safety Tag Information1-2 Equipment Function 1-3 AccessoriesGeneral Information 1-1 Introduction1-5 Necessary Documents 1-4 Customer Service1-6 System Capabilities Note E Denotes “CE” models, including 220/1/50 operation and CE mark 1-7 Models Covered in this ManualPowder Hopper Loaders 1-8 Standard Features2-1 Work Rules Safety2-2 Tools and Equipment Needed 2-4 Safety Considerations 2-3 Mechanical InstallationRead manual thoroughly before installing loader REPORTING A SAFETY DEFECT 2-5 General ResponsibilityNO MATTER WHO YOU ARE… REMEMBER 2-6 Operator ResponsibilityBEFORE REMOVING, ADJUSTING, OR REPLACING 2-7 Maintenance ResponsibilityPARTS ON A MACHINE, REMEMBER TO DO THE FOLLOWING BLEED all air pressure from system components refer to the Maintenance Section of this manual Understand the proper use of the safety devices provided 2-8 Safety2-8-2 Safety Circuit Standards Identify and locate specific safety devices2-8-3 Fail Safe Operation 2-8-4 Safety Device Lock-OutsThe Line Cord Plug 2-8-5 Lock-Outs, Plugs, and Other Safety DevicesMaximum Machine-Side Throughput 3-1 Unpacking and Inspection Shipping Information3-2 In the Event of Shipping Damages United Parcel Service Shipment 3-3 If the Shipment is Not CompleteParcel Post Shipment until you receive shipping instructions from the manufacturer 3-4 If the Shipment is Not Correct3-5 Returns Do not return any damaged or incorrect items4-3 Mounting Powder Hopper Loaders Installation & Setup4-1 Safety Considerations 4-2 Necessary ToolsThe manufacturer is not responsible for equipment damage 4-5 Mounting Tips4-6 Attaching the Pickup Wand 4-7 Making Compressed Air Connectionstight 4-8 Making Electrical ConnectionsCan the material level switch activate without obstruction? 5-1 Pre-Startup ChecklistOperation 5-2 Operating SequenceSERIES ONE ON OFF AUTOLOADERT M5-4 Changing the Conveying Sequence 5-3 Starting the Loader5-5 Selecting the Most Efficient Loading Sequence Page Conveying Sequence DIP Switch Chart, Program A05368145-6 Shutting Down the Hopper Loader Using the Series One Controller These components are not designed to support the assembly 6Maintenance6-1 Routine Maintenance Cleaning FiltersUse a stable platform if working above floor level 6-2 Replacing Motor BrushesWEAR SAFETY GLASSES BEFORE performing this procedure Replacement and ReassemblySeating Motor Brushes normal TroubleshootingPowder Hopper Loaders normalPossible cause ProblemSolution Powder Hopper Loaders Cont’dSpecial Voltages Loader Options9-1 Powder Hopper Loader System Component Description Spare Parts9-2-1 Overview Component Identification and Location 10-2-1 Credit Returns Technical Assistance10-1 Contact Information for Technical Assistance 10-2 Returned Material Policy10-2-2 Warranty Returns Read Operation and Installation Manual Earth Ground 11Safety Tag Information11-1 Powder Hopper Loader Safety Tags 11-2 Pushbutton and Keypad TagsModel Number 50E 11-3 Loader Identification Serial Number TagLocated on back of mixing chamber Series Powder Hopper Loader