Safety Considerations
Powder hopper loaders are designed to provide safe and reliable operation when installed and operated within design specifications, following national and local safety codes.
To avoid possible personnel injury or equipment damage when installing, operating, or maintaining this equipment, use good judgment and follow these safe practices:
;Follow all SAFETY CODES.
;Wear SAFETY GLASSES and WORK GLOVES.
;Disconnect and/or lock out power before servicing or maintaining the powder hopper loader.
;Use care when LOADING, UNLOADING, RIGGING, or MOVING this equipment.
;Operate this equipment within design specifications.
;OPEN, TAG, and LOCK ALL DISCONNECTS before working on equipment. You should remove the fuses and carry them with you.
;Make sure the hopper loader and components are properly GROUNDED before you switch on power.
;Do not jump or bypass any electrical safety control.
;Do not restore power until you remove all tools, test equipment, etc., and the powder hopper loader and related equipment are fully reassembled.
;Only PROPERLY TRAINED personnel familiar with the information in this manual should work on this equipment.
Powder Hopper Loaders | Page 3 |
