•If your blender has been inoperative or unattended, check all settings before starting the unit.
•At the beginning of your shift and after breaks, verify that the controls and other auxiliary equipment are functioning properly.
•Keep all safety guards in place and in good repair. NEVER attempt to bypass, modify, or remove safety guards. Such alteration is not only unsafe, but will void the warranty on your equipment.
•When changing control settings to perform a different mode of operation, be sure selector switches are correctly positioned. Locking selector switches should only be adjusted by authorized personnel and the keys removed after setting.
•Report the following occurrences IMMEDIATELY:
•unsafe operation or condition
•unusual blender action
•leakage
•improper maintenance
•NEVER stand or sit where you could slip or stumble into the loader while working on it.
•DO NOT wear loose clothing or jewelry, which can be caught while working on a loader. Also cover or tie back long hair.
•Clean the loader and surrounding area DAILY, and inspect the machine for loose, missing or broken parts.
•Shut off power to the loader when it is not in use. Turn the switch to the OFF position, or unplug it from the power source.
2-7 Maintenance Responsibility
Safety is essential to the good health of both operator and machine. If you are a maintenance worker, you must make safety a priority in order to effectively repair and maintain equipment.
BEFORE REMOVING, ADJUSTING, OR REPLACING
PARTS ON A MACHINE, REMEMBER TO DO THE
FOLLOWING:
Powder Hopper Loaders | Page 15 |
