Sterling BP1018, BP1012 If the Shipment is Not Correct, Returns, Uncrating Your Granulator

￿

￿

￿

￿

Operating and Installation packet

Detailed recommended spare parts list

Electrical schematic and panel layout drawings

Component instruction manuals

Re-inspect the container and packing material to see if you missed any smaller items during unpacking.

3-4 If the Shipment is Not Correct

If the shipment is not what you ordered, contact the shipping department immediately. For shipments in the United States and Canada, call 1 (800) 229-2919; for all other countries, call our international desk at (508) 399-3100. Have the order number and item number available.

Hold the items until you receive shipping instructions.

3-5 Returns

Important!

Do not return any damaged or incorrect items until you receive shipping

instructions from the shipping department.

3-6 Uncrating Your Granulator

Prepare in advance the site you have selected for installation of the granulator. Be certain that the area to be occupied by the machine is clean, level, and free of obstructions. The site you have selected must have a floor rating to adequately support the weight of the machine.

Your granulator is mounted on a wooden skid and blocked and banded to secure it for shipment. All non-painted items subject to corrosion are coated with a quality rust preventative, and the machine is covered with heavy-duty polyethylene to protect it from moisture and dirt. Granulators are normally shipped completely assembled unless the size of the machine or an agreement for special shipping arrangements prompts partial assembly.

If inspection, after shipment, has revealed no shipping damage, unpack the unit by removing the polyethylene protective covering and banding. Remove the envelope with the parts list, assembly

Page 22 of 53