Page 22 of 60
Figure 2: 6” Default “Station Status” Screen Before Setup
1. At the “Station Status” screen (Figure 2) or at the “Pump
Status” screen, touch the SYSTEM SETUP button. The
“Menu” screen opens.
Figure 3: 6” “System Setup” Screen Before Setup
2. At the “System Setup” screen, (Figure 3), touch
STATIONS ACTIVE A keypad pops up.
3. Enter the total number of stations (1-38) to be controlled
by the system. Use CLR to erase any mistakes. Use
ENT to enter the value. The keypad disappears, and the
new setting appears under STATIONS ACTIVE.