Page 28 of 60
Figure 9: 6” Pump Setup Screen Before Setup
3. Adjust settings as required. Touching any box that
appears in red (for “disabled”) toggles it to green (for
“enabled”), and vice versa. Touching any box that
appears in white gives you a keypad to enter a new
value.
Keypad entry works as with many ATM machines: the
first digit you enter initially appears in the rightmost
column and moves to the left as you enter more digits.
You do not need to use the decimal point. Use CLR to
erase any mistakes. Use ENT to enter the value. The
keypad disappears and the “Pump Setup” screen shows
the new value in the selected white box.
See page 49 for details on the options and their default
settings.
4. As appropriate, setup the rest of the pumps using the
following method:
• Use the PREVIOUS or NEXT buttons to navigate to
other pumps. Touch PREVIOUS to go to the
previous “Pump Setup” screen, or touch NEXT to go
to the next “Pump Setup” screen.