Page 45 of 60
5-3-4 Alarms
5-3-4-1 Reviewing Alarms
To review your system’s alarms, touch Alarms on any
screen. The “Alarm Log” screen appears, with the newest
alarm listed first.
Figure 17: 6” Alarm Log Screen
To scroll up and down through the list, touch DOWN or UP
at the top of the screen.
5-3-4-2 Silencing Alarms
Whenever a new alarm occurs, your controller sounds the
horn and turns on the strobe light at each central alarm.
Touch SILENCE on the alarm message banner that appears
when a new alarm occurs.
The horns and lights at the central alarms turn off. Your
controller has separate, configurable settings for how long
the horns should remain silent and how long the light should
remain off. If the alarm condition still exists when either of
these times elapses, the corresponding device (horn or light)
turn on again and the alarm message banner appears. If a
new alarm occurs, both horns and lights turn on. See page
50 for a list of alarms and their possible causes.