Page 33 of 60
Figure 10: 6” “Station Status” Screen During Operation
The status of each station is color-coded. You can see an
explanation of each status by using the online help. To do so
from this screen, complete the following steps:
1. Touch HELP. The “HELP Menu” screen opens.
2. Touch Station States. The “Station Symbols Help”
screen opens, explaining the status represented by each
color.
3. When you are finished reviewing the information, touch
HELP MENU. The “Help Menu” screen opens.
The following table explains the status represented by each
color at the “Station Status” screen.
Color Label Description
Gray outline Offline Station is not enabled. The controller ignores any demands or
alarms.
Green Full Station is enabled and idle (full).
Yellow Demand Station requires material.
Blue Convey Station is being loaded with material.
Light blue Dry Air
Convey
Air to convey material is coming from dry air source, rather than
ambient air.
Purple Unload Station is dumping material into its receiver.
Blue, blinking Priority Station is in priority convey mode. Its pump will be temporarily
dedicated to filling it as soon as possible.
Red Alarm Station is in alarm.
Red outline Critical Station is in critical alarm. The controller has disabled the station
until the alarm is cleared.
White Purge Air is being drawn through material lines.