Page 32 of 60
5-3 General Operation
5-3-1 Overview
Your SCC4-38 controller electrically controls valves and
solenoids to convey material from a central location to
individual stations as needed. The controller senses
demands for material at the stations and responds to the
demands in a timely fashion.
This section gives the procedures for using your controller,
and it covers tasks that can be carried out with no password
or with an operator’s password. The section is divided into
three sub-sections:
• Basic tasks: tasks normally carried out by a station
operator
• Advanced tasks: tasks normally carried out by setup
personnel
• Alarms: silencing and clearing alarms
Important! Before you carry out any of the procedures in this chapter, the
system must be set up as described earlier in this chapter.
5-3-2 Basic Tasks
5-3-2-1 Reviewing Station Status
The starting point for all operations is the “Station Status”
screen. To reach this screen from any other screen, touch
STATION STATUS on any screen. The “Station Status”
screen appears.