Sterling Plumbing SCC4-38 - page 39

Page 38 of 60
5-3-2-6 Reviewing and Adjusting Basic Station Settings
The Sterling controller has a “Station Operator” screen for
each station, as shown below. This screen enables you to
review and adjust all basic settings for the station.
To reach the “Station Operator” screen, complete the
following steps:
1. Go to the “Station Status” screen, if needed. To reach
this screen from any other screen, touch STATION
STATUS button.
2. Touch and hold the icon for the station, until the controller
either prompts for the password or displays the “Station
Operator” screen. Once you have entered the password
(if needed), the “Station Operator” screen appears.
Figure 13: 6” “Station Operator” Screen
Buttons in white are settings that you can adjust at this
screen. Boxes in black are for display only. If a pump
assignment or purge time can be changed from operator
screen, this must be done at the “Station Setup” screen.